Hallandale Beach, FL · Supply & project desk
Order tools, fasteners, lumber, concrete and roofing from one counter, then let the project desk handle the estimate, take-off and delivery.
01 / Supply counter
Eight departments, grouped by how a job is built: cut it, fix it, pour it, roof it, finish it, stay safe doing it.
Drills, saws, grinders and sanders for framing, cutting and finishing.
Hammers, levels, tapes and knives that stay in the belt.
Screws, anchors and hurricane ties for storm-rated connections.
Framing lumber and sheathing panels, sized for the job.
Mix, mortar, rebar and block for slabs, walls and footings.
Underlayment, shingles, sealant and flashing for the roof deck.
Drywall, compound, caulk and paint tools for the final coat.
Hard hats, eyewear, gloves and hi-vis for a safer site.
02 / Project desk
Four steps keep a job on paper before it costs money on site.
Describe the job, add plans or photos and tell us where the site is.
We turn drawings and site notes into a quantity list you can check line by line.
Receive a written estimate in US dollars, with delivery and tax shown separately.
Materials are scheduled to the job site so crews start with what they need.
03 / On the counter
POW-001
Power Tools
Compact two-speed drill/driver for framing, decking and general fastening, sold as a kit with battery and charger. The 1/2 in keyless chuck takes standard drill and driver bits.
HAN-006
Hand Tools & Layout
Everyday claw hammer for driving and pulling nails on framing and carpentry jobs. The steel handle has a rubber grip that cuts down on hand fatigue.
FAS-011
Fasteners & Hurricane Hardware
Formed steel clip that connects a roof rafter or truss to the top plate to help resist uplift. Install with the nail size and count shown on the packaging and your plans; in South Florida confirm the connector your inspector requires.
LUM-016
Lumber & Sheathing
Precut stud length for interior and exterior wall framing. Kiln-dried for stable dimensions; actual size is 1-1/2 in x 3-1/2 in.
CON-021
Concrete & Masonry
Plain Portland cement (Type I/II or Type IL, depending on current stock) for mixing your own concrete, mortar or grout with sand and aggregate. Keep the bag dry; unused cement hardens when it absorbs moisture.
ROO-027
Roofing & Waterproofing
Laminated fiberglass-asphalt shingle for residential re-roofing. Three bundles cover one roofing square; verify wind rating on the packaging for your zone.
FIN-031
Drywall & Finishing
Standard gypsum board for interior walls and ceilings. Score, snap and hang with drywall screws; not for wet areas.
SAF-036
Safety & Site Gear
Yellow cap-style hard hat for general site head protection. The ratchet suspension adjusts to head sizes with one hand.
05 / Built for the climate
Roofs and openings are tied down with hurricane hardware, so we list sizes, gauges and fastener schedules on the product card.
Moisture and coastal air corrode bare steel fast. Look for galvanized, coated or stainless fasteners where metal is exposed.
Requirements vary by city and county. Check your building department first; the desk can help you assemble the drawings and product sheets.
06 / Questions
We coordinate material delivery to sites in South Florida. The delivery cost and timing are confirmed with you in writing before you pay, and depend on the order size, the access to the site and whether unloading help is needed.
Each product card lists the sizes, loads and finishes that matter. Broward and Miami-Dade are high-velocity hurricane zones, where many exterior products need specific product approvals. Confirm what your local building department requires before you buy, and send us the details if you want help reading the paperwork.
The project desk covers estimating, material take-off, site measuring, delivery and coordination. Where Florida law requires a licensed contractor for a trade, the scope is confirmed in writing before any work starts.
Yes. Use the Get an estimate button, add a few lines about the job and your plans or photos, and the desk replies with questions or a written estimate.
Contact us with your order number and a short note. Unopened, unused items are reviewed for return; cut-to-length, mixed or opened bagged materials usually cannot be returned. We confirm before you ship anything back.
Prices are in US dollars. Delivery and Florida sales tax are confirmed with you before payment, and the order summary shows the total before both.
Tell the project desk what you are building and where. We reply with questions or a written estimate.
