Power and hand tools, fasteners and hurricane hardware, lumber, concrete, roofing, drywall and safety gear. Prices are in US dollars.
5 products
FAS-011
Fasteners & Hurricane Hardware
Formed steel clip that connects a roof rafter or truss to the top plate to help resist uplift. Install with the nail size and count shown on the packaging and your plans; in South Florida confirm the connector your inspector requires.
FAS-012
Fasteners & Hurricane Hardware
Heavy-duty wood screws used in place of lag bolts for interior framing connections, beams and ledgers, driven without a pilot hole in softwood. Zinc-plated: for interior/dry use only. For exterior work or treated lumber, use hot-dip galvanized or stainless fasteners. Check the load table before substituting for bolts.
FAS-013
Fasteners & Hurricane Hardware
Plastic-collated full-round-head nails for pneumatic framing nailers that take 21-degree strips. Bright finish is for dry interior framing; check the finish for exterior work.
FAS-014
Fasteners & Hurricane Hardware
Expansion anchors for fixing plates and steel to cured concrete in interior/dry locations. Drill a hole of matching diameter, drive the anchor in and torque the nut. For exterior slabs or treated sill plates, use hot-dip galvanized or stainless anchors.
FAS-015
Fasteners & Hurricane Hardware
Face-mount hangers that carry a 2x8 joist or rafter on a ledger or beam. Fasten with the nails listed on the packaging.
